Maintain your favorite camera lenses!
This suction tool is very convenient because it can suck and move the lens with its suction cup without having to touch the lens when you are removing the lens for cleaning or assembly.
＜How to Use this Product＞
１． Wipe the inside of the suction cup with alcohol, etc.
２． Press the suction cup against the lens (please do not press the air pump).
３. Make sure that the suction cup is firmly pressed against the lens, then you can lift the lens and move it.
４． To remove the lens from the suction cup, press the air pump.
＜Usage Precautions＞
- After assembling the lens, if you find any trace of the suction cup on the lens, please wipe off the trace well using cleaning liquid, etc.
- This product removes the attached lens by blowing the air inside the air pump. Therefore, if you attach the suction cup to the lens while pressing the air pump, there may be not enough air inside the air pump to remove the lens from the suction cup. Please be careful.
- Please note that this product may not be used depending on the shape of the lens.
JHT-611
Use the two different lengths of pipes effectively to adapt to the parts which need manipulating. Combine CLSS components for assembly or repair of lenses and optical elements. Easily done with our vacuum Super Suction. Specially designed CLSS leaves no stain, grease, or smudges on the surface of your lens. Please be advised, before using CLSS that the surface should be cleaned using liquid ether.
<Specifications>
Size: φ35 (air pump)/φ20 (suction cup) X 70(L)mm
Material: silicone rubber/natural rubber/brass
Made in Japan
JHT-613
The lens size that this product can handle is Φ45 mm or larger.
<Specifications>
Size: φ34 (air pump)/φ45 (suction cup) X 70(L)mm
Weight: 16.8g
Material: silicone rubber/natural rubber/brass
Made in Japan
JHT-614
The lens size that this product can handle is Φ110 mm or larger.
<Specifications>
Size: φ60 (air pump) / φ100(suction cup) X 142(L)mm
Weight: 100g
Material: silicone rubber/natural rubber/brass
Made in Japan