Maintain your favorite camera lenses!

This suction tool is very convenient because it can suck and move the lens with its suction cup without having to touch the lens when you are removing the lens for cleaning or assembly.

＜How to Use this Product＞

１． Wipe the inside of the suction cup with alcohol, etc.
２． Press the suction cup against the lens (please do not press the air pump).
３. Make sure that the suction cup is firmly pressed against the lens, then you can lift the lens and move it.
４． To remove the lens from the suction cup, press the air pump.

＜Usage Precautions＞

-  After assembling the lens, if you find any trace of the suction cup on the lens, please wipe off the trace well using cleaning liquid, etc.
- This product removes the attached lens by blowing the air inside the air pump. Therefore, if you attach the suction cup to the lens while pressing the air pump, there may be not enough air inside the air pump to remove the lens from the suction cup. Please be careful.
- Please note that this product may not be used depending on the shape of the lens. 

Differences Between the Three Camera Lens Super Suction Tools

JHT-611
Use the two different lengths of pipes effectively to adapt to the parts which need manipulating. 

This set includes a 105 mm-long brass pipe with two pipe caps, designed for picking up very small parts located deep inside lenses or other hard-to-reach areas.
It also includes two 20 mm-diameter suction cups for handling small lenses.
If you need to handle larger lenses, please use the JHT613 or JHT614.

This tool is recommended not only for lens maintenance, but also for those who repair camera bodies.

<Contents>
φ35mm (air pump) : 1 pic
φ20mm (suction cup)  : 2 pic
Brass pipe : 1 pic
Pipe cap : 2 pic
Material: silicone rubber/natural rubber/brass
Weight: 23g 
Made in Japan

========================

JHT-613
This tool can handle lenses with a diameter of 45 mm or larger. It is recommended for those who mainly perform lens maintenance.

<Contents>
φ35mm (air pump) : 1 pic
φ45mm (suction cup) : 1 pic
Weight: 16.8g
Material: silicone rubber/natural rubber/brass
Made in Japan
========================

JHT-614
This tool can handle lenses with a diameter of 110 mm or larger. It is recommended for those who mainly perform lens maintenance.

<Specifications>
φ60 (air pump) : 1 pic
φ100(suction cup) : 1 pic
Weight: 100g
Material: silicone rubber/natural rubber/brass
Made in Japan