[NEW!] Camera Eyecup for Nikon JHTDK-55 Made in Japan

Click here!

<Compatible models> 
 Nikon　Z5 / Z5Ⅱ / Z6 / Z6Ⅱ / Z6Ⅲ / Z7 / Z7Ⅱ

Note : Please adjust the hood of the JHTDK-55 when opening or closing
 the LCD monitor of the Zf.

<Installation/Removal>
1. Remove the stock eyepiece from the camera. Follow the instructions
in the instruction manual of your camera to install / remove the stock.

2. Attachment:
Align the JHTDK-55 with the grooves on the camera's viewfinder, and press the plastic part in to secure it.

3. Removal:
Push it upward in the opposite direction of attachment.

When attaching or removing, press the plastic part at the base of the hood.
Be careful not to push or pull the hood itself, as it may tear.

When attaching or removing, press evenly and in parallel from the two points indicated by the arrows.

<Caution>
・Do not use the product for any purpose other than its intended use.
・Do not install the product on incompatible models.
・Do not store in high temperatures, high humidity, or in direct sunlight.
・Keep out of reach of children.
・The specifications of this product are subject to change without notice.

Size: Approx. φ45 x 14.6 (L) mm
Weight: Approx. 5.9g
Material: Silicone/ABS